60-80kg/h Dry Type Fish Feed Extruder FY-DGP50

Dry type fish feed extruder is suitable for small- or medium-scale fish farms and fish feed industry, for processing shrimp feed, prawn feed, floating fish feed, sinking fish feed pellets and pet feed pellet.

Working Principle of Dry Type Fish Feed Extruder
Under the action of the frictional force of the principal axis and flat-die, the compression roller spins. The high temperature between the roller and die ripens the starch of the materials, and the protein becomes congealed. Then the fish feed is extruded from the holes of the die. Fish feed pellets are conveyed out of the extruder. Additionally, we can choose the length of the feed by regulating the angle of the cutting knife.

Features of Dry Type Fish Feed Pellet Extruder
1.Simple structure, widely used, small flooring space, low noise.
2.We can use dry powder materials to make feed pellets without adding extra water into the dry type fish feed extruder. The dry pellet feed is convenient to store.
3.The dry pellet feed is well processed which is easy for the animals to digest. During the process, the pathogenic microorganism and parasites are eliminated.
4.This fish feed pellet extruder also applies to make pellet feed for rabbits, ducks and the like. What’s more, the pellet feed is more economical than the compound mash feed.
5.There are many different press molds you can choose in according to the size of the pellet that you need.
6.The raw materials used in producing pellet feed is various.

Tips of Dry Type Fish Feed Extruder
1.Stay away from the feed inlet when fish feed extruder works. If you want to add materials into it, you should be with the help of a stick, not your hand.
2.We should add materials before turning on the machine. And leave some materials in the extruder when you stop the machine in case the express roller and die mold directly touch each other.
3.If the machine gets stuck, we should turn down the machine immediately.
4.We should loosen the bolt of the express roller after finishing work.
5.Check the degree of tightness of the belt to prevent the belt slipping and decrease the capacity.
6.Add and replace the lubricating oil regularly.
7.It is normal that the temperature of engine rises to 70 degrees after a long continuous working.

Any interest or need, please feel free to contact info@fishfeedmachinery.com or Skype: fishfeedmachinery
Sign In or Register to comment.