I am a new member in this feed industry.
I work in a company which works out projects in ethanol distilleries and brewries.
Our main raw material in European region is wheat and corn.
So i want to know which mill will be preferable in terms of initial cost and operationgcost (i,e. power consumption, manpower).
Also i want to compare which method is good dry miling or wet milling in the similar aspects as mentioned above.
One of typical application is -
Particle size distribution requiredis-
Upto 0.3 mm - 10 to 20%
0.3 mm to 0.8 mm - 60 to 70%
0.8 mm to 1 mm - 10 to 20%
1 mm to 1.2 mm - 5 to 10%.
The typical wheat properties-
Bulk Density - 500-600 kg/m3
Particle size - 4-8 mm
Moisture - 10 % w/w.
Impurities - 0.1 to 0.2 % max of input ( Husk,stones&other impurities )
So please guide me in this case, or suggest me some links so that i will be able to study it deeply.