Dry Powder Plastic Additives
Does anyone have knowledge of know of anyone processing dry powder from plastic additives into pellets &/or crumbles?
Moisture cannot be used to bind and the additives are temperature sensitive, i.e. temp must be kept below ~ 140 F. Avergae particle size of the powders is 6 - 8 micron, and the highest concentration possible of the active ingredient is desirable
Moisture cannot be used to bind and the additives are temperature sensitive, i.e. temp must be kept below ~ 140 F. Avergae particle size of the powders is 6 - 8 micron, and the highest concentration possible of the active ingredient is desirable